VIVILON Vinyl Life™
What it is:
Vinyl Life is a waterborne hybrid acrylic-urethane polymer matrix which dries to a clear, high gloss coating with exceptional non-yellowing UV, chemical, stain, and abrasion resistance. With a low surface tension (27 dynes per cm), it provides excellent wetting of and subsequent adhesion to a variety of flexible substrates, including most plasticized PVC, i.e., vinyl. It restores the color, soft feel and gloss to any vinyl surface at a fraction of the replacement cost.
Where is it used:

To restore and protect vinyl, canvas or fabric awnings

How Can I Buy It

VIVILON makes it simple, quick and easy to purchase our products. By clicking the BUY NOW button below, you will be taken to our PayPal Secure Payment Shopping Center where you will be able to buy whatever you want, using whatever means of payment you want. Credit Cards (Visa, Mastercard, American Express or Discover), Debit Cards, E-Checks or PayPal. Your order will be packed and shipped the next day at no extra charge. That's right, the shipping cost is paid by VIVILON!

IMPORTANT: All information used to process your order is secure with PayPal and we never see it. Of course, during business hours, you can always call us to check on your order or have any question answered. If you are ready to begin shopping, click on the button below. Thank You!

*** Important: For Canadian Customers, Our Distributor can be reached by calling
Toll-Free (888) 652-8665 or email them at ***

One Gallon

Two Gallons

Five Gallons
Solids Content: 40%
Weight Per Gallon: 8.9 Pounds
Elongation: 455%
Tensile Strength: 4,360 P.S.I.
Coverage Rate: 950-1050 Square Feet Per Gallon (SFPG)
Time to Touch Dry: 10-15 Minutes At 70 Degrees F; 50% Relative Humidity
Time To Full Cure: 5 Days
Dry Time Between Coats: 1.5 Hours (At 70 Degrees F; 50% Relative Humidity)
Recommended Wet Film Thickness (WFT) Per Coat: 1.5 Mils Or 38 Microns
Approximate Dry Film Thickness (DFT) Per Coat: .6 Mil or 16 Microns
Theoretical Coverage @ .6 mil (DFT) Per Coat: 1065 Square Feet
Typical 60 Degree Gloss: 90
Viscosity Using #2 Zahn Cup: 29 Seconds
Application Methods:
Conventional or HVLP compressed air, HVLP turbine, airless, air assisted airless, brush, or short nap roller.
Recommended Spray Gun Setups:
  • Siphon Feed: 2.0 mm to 2.4 mm (.0787 to .0866)
  • Gravity Feed: 1.4 mm to 1.6 mm (.0551 to .0630)
  • Pressure Feed: .8 mm to 1.0 mm (.0315 to .0394)
Equipment Clean-up :
Soap and water.
Thinning Solvent :
For Faster Dry Time:
Add from 1 to 3 ounces of Xylene per quart of Tough Enough. Recommended whenever spraying below 50 degrees Fahrenheit.
Maintenance Cleaning:
To wash Vinyl Life coated surfaces after full cure, use a neutral cleaner and soft brush or roller sponge. DO NOT USE hot water, steam, highly acidic or caustic materials. They are not needed or advised. A dilute solution of pool chlorine or sodium percarbonate may be used if necessary to remove light mold, mildew or algae growth.
Although Vinyl Life has been formulated to pass a 5 Cycle Freeze-Thaw, it IS a waterborne coating. Therefore, DO NOT allow exposure to temperatures below 40 degrees Fahrenheit. Store containers on pallets, shelves or insulated flooring.
The Material Safety Data Sheet (MSDS) and the container labels for these products contain additional important health and safety information, which you should read carefully and follow before using this product.
Beauty and Protection Perfection